Sienna Maker Jacket Pattern by Closet Core – Fabric Romance

My Cart

Close

Sienna Maker Jacket Pattern by Closet Core

We have 5 in stock.
€20,00 EUR

Sienna is a chic utility jacket inspired by vintage French workwear. Designed for hard-wearing use by makers and artists, it functions as both stylish outerwear and a highly practical layer for use inside the studio.

With a slightly dropped shoulder, Sienna features a crisp notched collar which can be worn buttoned at the neck with an optional snap button. It is unlined and finished with durable seams. Views A & B feature deep hip pockets, a hidden breast pocket and waist-cinching belt with D ring closure that can be worn closed, or open by looping the belt in the opposite direction; View A hits at mid-thigh and View B ends at upper thigh. View C is a short chore jacket with button closure, optional sleeve pockets and a back button placket.

Sizes: 0-20  (see size chart)

Fabric Suggestions
Durable woven fabrics like denim, twill, canvas and heavyweight linen. 

 

Fabric Requirements (45"/114cm wide fabric)

View A (Full length jacket)

Sizes 0-20: 0-8 = 3.75yd / 3.5m, 10-14 = 4 yd / 3.75m, 16-20 = 4.5yd / 4.1m

Sizes 14-30: 14-22 = 4.5yd / 4.1m, 24-30 = 4.75 yd / 4.3m 

View B (Mid length jacket) 

Sizes 0-20: 0-8 = 3.5yd / 3.2m, 10-14= 3.75yd / 3.5m, 16-20 = 4 yd / 3.75m 

Sizes 14-30: 14-22 = 4.25yd / 3.9m, 24-30-14 = 4.5 yd / 4.1m 

View C (Cropped jacket) 

Sizes 0-20: 0-8 = 2.75yd / 2.5m, 10-14 = 3yd / 2.75m, 16-20 = 3.25yd/3m 

Sizes 14-30: 14-22 = 3.25yd / 3m, 24-30 = 3.5 yd / 3.2m 


Fabric Requirements (58"/150cm wide fabric)

View A (Full length jacket) 

Sizes 0-20: 0-8 = 3yd / 2.75m, 10-14 = 3yd / 3m, 16-20 = 3.5yd / 3.2m 

Sizes 14-30: 14-22 = 3.5yd / 3.2m, 24-30 = 3.75 yd / 3.5m 

View B (Mid length jacket) 

Sizes 0-20: 0-8 = 2.75yd / 2.5m, 10-14 = 3yd / 2.75m, 16-20 = 3.25 yd / 3m 

Sizes 14-30: 14-22 = 3.25yd / 3m, 24-30 = 3.5 yd / 3.2m 

View C (Cropped jacket) 

Sizes 0-20: 0-8 = 2yd / 1.85m, 10-14 = 2.25yd / 2m, 16-20 = 2.5yd / 2m 

Sizes 14-30: 14-22 = 2.75yd / 2.5m, 22-30 = 3 yd / 2.75m 


Additional Supplies

  • Lightweight non-stretch fusible interfacing (Sizes 0-20: View A = 1.25yd, View B = 1 yd, View C = .75yd, Sizes 14-30: View A & B = 1.25yds, View C =1 yd ) 
  • Pocket lining (View C = .25yd) 
  • Polyester thread (topstitching thread optional)
  • View A & B only: D rings or belt slider (1.5" / 38mm) 
  • View C only: Buttons or snaps - 9 x 5/8" (15mm)
  • Point turner and/or presser for collar 
  • Marking tool 
  • Optional: One set of snap buttons for collar 
  • Optional: Bias tape for finishing seams 
  • Optional: 5"/13cm twill tape or ribbon for hanging hook loop

 

Please note: this product is a printed pattern.